Esc C 4 N - Citizen CT-D150 Command Reference Manual

CT-S280
Support
model
CT-S281
CT-D151/E651

ESC c 4 n

[Function] Selecting the Paper Near-end Sensor valid for print stop
[Code] <1B>H<63>H<34>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is common to the model]
• This command selects the Paper Near-end Sensor which helps to stop printing when the paper supply
almost runs out.
• Each bit for "n" has the following meaning:
Bit
0
1
2
3
4
5
6
7
[The specification which depend on the model]
CT-P29x
• This command is invalid due to no paper near end sensor.
[Caution] [The specification which is common to the model]
• This printer can only select one kind of Paper Sensor, a Paper Near-end Sensor.
[Default] n=0
CT-S300
CT-S310 CT-S801/851
Position
Paper Near-end
Paper Near-end
Undefined
Undefined
Undefined
Undefined
Undefined
Undefined
series/CT-S301II/CT-D150/CT-E351
- 147 -
CT-S2000 CT-S4000
CT-S601/651
0
Disabled
Disabled
-
-
-
-
-
-
CT-S251 CT-D150/E351
CT-P29x series CT-S310II
Value
1
Enabled
Enabled
-
-
-
-
-
-