Citizen CT-D150 Command Reference Manual page 469

●MSW2-4:
Full Columns print
[Outline] Select the processing if print data closes to the end of line or the right of print width.
Full Col print
ON (1) OPERATION:
If printer receives data/command exceeding the full column, printer further waits for print data. If data
exceeding the full column is a command, printer operates following the command.
OFF (0) OPERATION:
If printer receives data/command exceeding the full column, it automatically prints data in buffer followed by
a line-feed.
<Example>
If the first data after exceeding the full column is a control code such as<ESC !>;
If OFF (0) is set, print data within buffer and put a line feed, or
If ON (1) is set, print no data within buffer and further wait for print data.
●MSW2-5:
Cover close return
[Outline] Select the operating taken after printer cover is opened during printing, paper is refilled with no-paper (PE) is
detected, then cover is closed to restart printing.
Resume aft PE
ON (1) OPERATION:
Restart printing from the heading of remaining data.
During printing image, bar code, vertically-doubled character or page mode, if cover open or PE is detected,
then after return, restart printing from heading of the remaining data.
OFF (0) OPERATION:
Print data continued from the previous printing. During printing, if cover open or PE is detected, then after
return, restart printing data immediately after an error data.
OFF(0) ON(1)
Line Feed Wait Data
OFF(0) ON(1)
Next
- 468 -
Top