Gs C ; N1 ; N2 ; N3 ; N4 ; N5 - Citizen CT-D150 Command Reference Manual

Hide thumbs Also See for CT-D150:

Table of Contents

CT-D151/E651

GS C ; n1 ; n2 ; n3 ; n4 ; n5 ;

Setting the numbering counter mode (B)

<1D>H<43>H<3B>H<n1><3B>H<n2><3B>H<n3><3B>H<n4><3B>H<n5><3B>H

<n1>, <n2>, <n3>, <n4>, <n5> are character codes.

0≤n1, n2, n5≤65535

0≤n3, n4≤255

[The specification which is common to the model]

• This command sets the numbering (serial number counter) mode and a counter value.

n1: First value of ounter range

n2: Last vale of counter range

n3: Counter step value

n4: Identical counter print count

n5: Counter start value

n1<n2: Count-up system

n1>n2: Count-down system

n1=n2 or n3= 0 or n4=0 : Counter stop

[The specification which is common to the model]

• If the n5 counter start value is beyond the counter range specified with n1 and n2, it is assumed to

• If each value of n1 through n5 contains the character code other than "0" through "9", the printer will invalidate

the data up to that parameter and handle the subsequent data as normal data.

n1=1, n2=65535, n3=1, n4=1, n5=1

CT-D150/E351

CT-P29x series

Show Quick Links

Table of Contents