Commands For Non-Volatile Memory; Gs 8 L P1 P2 P3 P4 M Fn [Parameter] - Citizen CT-D150 Command Reference Manual

Support
model
CT-D151/E651

2.2.13 Commands for Non-volatile Memory

GS ( L pL pH m fn [parameter]

GS 8 L p1 p2 p3 p4 m fn [parameter]

[Function] Specifying graphics data
[Code] <1D>H<28>H<4C>H<pL><pH><m><fn>
<1D>H<38>H<4C>H<p1><p2><p3><p4><m><fn>
* In the explanation of function, the code of GS ( L is used.
• GS ( L and GS 8 L ) are the same function.
• When [parameter] exceeds 65533 bytes in each function, GS 8 L is used.
[Outline] [The specification which is common to the model]
• Executes the processing related to the graphics data specified by the function code (fn).
[The specification which depend on the model]
CT-S2000/CT-S4000/CT-S801/CT-S851/CT-S601/CT-S651/CT-S310II/CT-D150/CT-E351
fn
0, 48
2, 50
3, 51
64
65
66
67
69
112
CT-S280 CT-S300
CT-S281 CT-S310
Code
GS ( L pL pH m fn
GS ( L pL pH m fn
GS ( L pL pH m fn
GS ( L pL pH m fn d1 d2
GS ( L pL pH m fn d1 d2 d3
GS ( L pL pH m fn kc1 kc2
GS ( L pL pH m fn a kc1 kc2 b xL xH
yL yH [c d1...dk] 1... [c d1...dk] b
GS ( L pL pH m fn kc1 kc2 x y
GS ( L pL pH m fn a bx by c xL xH yL
yH d1...dk
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
Function No.
Function48
Function50
Function51
Function64
Function65
Function66
Function67
Function69
Function 112
- 164 -
CT-S251 CT-D150/E351
CT-P29x series CT-S310II
Function
Sends NV graphics memory
capacity.
Prints graphics data stored in print
buffer.
Sends the remaining amount of NV
graphics memory.
Sends key code list of defined NV
graphics.
Erases all data of NV graphics in a
lump.
Erases the specified NV graphics
data.
Defines raster graphics data to NV
memory.
Prints the specified NV graphics.
Stores raster graphics data to print
buffer.