Msw4 - Citizen CT-D150 Command Reference Manual

4.2.4 MSW4

●MSW4-1:
Automatic length measurement
[Outline] In selecting black mark paper, set the enable/disable of automatic length measurement.
(Black mark/label support model only)
ON (1) OPERATION: Automatic length measurement is enabled.
OFF (0) OPERATION: Automatic length measurement is disabled.
●MSW4-2:
Black mark sensor position
[Outline] Selects black mark sensor position.
ON (1) OPERATION: Black mark sensor detects a black mark on the printing surface.
OFF (0) OPERATION: Black mark sensor detects a black mark on the printing back.
●MSW4-2：
Searching top of form at power on.
Set the enabled/disabled of the function to search the top of form at power on.
[Outline]
(CT-S281/CT-S2000/CT-S4000 unique)
ON (1) OPERATION:
OFF (0) OPERATION:
**This function is valid only on label models or black mark models.
** This function is invalid when thermal paper is selected on MSW4-4.
BM Measure
At power-up, measurement operation is taken.
Operation follows the value set by <GS l>.
BM sensor position
Power on TOF
Searching top is enabled
Searching top is disenabled
OFF(0) ON(1)
Invalid Valid
(CT-S300/CT-S310 unique)
OFF(0) ON(1)
surface back
OFF(0) ON(1)
Invalid Valid
- 473 -