Gs C 1 N1 N2 N3 N4 N5 N6 (Setting The Numbering Counter Mode (A)); Gs C 2 N1 N2 (Setting The Numbering Counter) - Citizen CT-S2000 Command Reference Manual

GS C 2 n1 n2
[Function]
[Code]
[Range]
[Outline]
[Caution]
[Default]
[See Also]
[Sample Program]
[Print Results]
Setting the numbering counter
<1D>H<43>H<32>H<n1><n2>
0≤n1≤255
0≤n2≤255
This command sets the numbering (serial number counter) value.
n1 + n2 x256 (n1 = remainder, n2 = quotient) becomes a counter value.
• If the counter is set with this command, a repeat count of the identical count will be
cleared.
• If the counter value is beyond the range specified with the GS C1 or GS C; command,
the counter will be initialized.
Not defined.
GS C0, GS C1, GS c, GS C;
See the Sample Program and Print Results for the GS C1 command.
- 105 -