Esc; Specifying The Bit Image Mode; N1><N2>[<D>]K - Citizen PPU-231II Command Reference Manual

ESC

m n1 n2 [ d ] k
*
[Function]
[Code]
[Range]
[Outline]
m
0 8-dots single density
1 8-dots double density
32 24-dots single density
33 24-dots double density
[Caution]

Specifying the bit image mode

<1B>H<2A>H<m><n1><n2> [<d>] k
m= 0, 1, 32, 33
0 n1
0 n2
0 d 255
k = n1 + 256
k = (n1+ 256
According to the number of dots specified in "n1", "n2", specify
the bit image of mode "m".
• The number of dots printed is divided by 256, whose quotient
is taken as n2 and residual as "n1".
• The total number of dots printed in the horizontal direction is
equal to n1 + (256
• When bit image data have been input in excess of dot positions
that can be printed on one line, the excess data are discarded.
• "d" is bit image data. Bits to be printed are specified as "1"
and those not as "0".
• The bit image modes specified by m are shown as follows:
Mode
No. of Dots Dot Density Dot Density Max. No. of Dots
• When the value of m is out of the above range, the data
following after n1 is processed as normal printing data.
• After completion of bit image printing, the printer returns to
normal data processing mode.
255
3
n2 (m = 0, 1)
n2) 3 (m = 32, 33)
n2).
Vertical Direction
8 67 DPI
8 67 DPI
24 203 DPI
24 203 DPI
— 24 —
Horizontal Direction
101 DPI 288
203 DPI 576
101 DPI 288
203 DPI 576