Optiview HDVR4/8/16-Q2 User Manual page 271

For detailed setups, please refer to chapter 5.8.3.1.1 motion detect for detailed
information.
5.8.3.2.3 Object Detect
Note:
The object detection function is valid once your network camera or your DVR
supports this function.
If your purchased DVR supports the object detection function, it supports one analog
channel. It is not for the digital channel.
From main menu->Setup->Event->IVS->Object, the object interface is shown as below.
See Figure 5-72.
Figure 5-71
456