Id Information Indication - Omron NX1P2 series User Manual

3 Configuration Units
3-1-6

ID Information Indication

You can check the followings in the ID information indications on the left side of the CPU Unit.
PORT1 :
PORT2 :
(B)
Ver.1.
LOT No. DDMYY
Letter
A Lot number and serial
number
B Unit version
C MAC addresses
D Hardware revision
*1. The hardware revision is not displayed for the Unit that the hardware revision is in blank.
3 - 18
(C)
HW Rev.
xxxx
(A)
Name
Shows the lot number and the serial number of the CPU Unit.
DDMYY: Lot number, : For use by OMRON, SSSS: Serial number
M is 1 to 9 for January to September, X for October, Y for November, and Z
for December.
Shows the unit version of the CPU Unit.
Shows the MAC addresses of the built-in EtherNet/IP port (port 1) and
built-in EtherCAT port (port 2) on the CPU Unit.
Shows the hardware revision of the CPU Unit.
(D)
Function
*1
NX-series NX1P2 CPU Unit Hardware User's Manual (W578)