Omron NX1P2 series User Manual page 178

5 Installation and Wiring
Applicable Wires
The wires that you can connect to the screwless clamping terminal block are twisted wires, solid wires,
and ferrules that are attached to the twisted wires.
 Dimensions of Wires Connected to the Terminal Block
The dimensions of wires that you can connect into the terminal holes of the screwless clamping ter-
minal block are as in the figure below.
Process the applicable wires that are specified in the following description to apply the dimensions.
2.7 mm max.
2.0 mm max.
Ground
terminals
5 - 46
2.4 mm max. (Terminals other than ground terminals)
1.6 mm max. (Terminals other than ground terminals)
NX-series NX1P2 CPU Unit Hardware User's Manual (W578)