Terminal Blocks - Omron NX1P2 series User Manual

3 Configuration Units
3-1-4

Terminal Blocks

The terminal blocks on the CPU Unit are removable screwless clamping terminal blocks that allow you
to easily connect and remove the wiring.
There are the input terminal block and output terminal block.
This section provides the part names and functions of the terminal blocks, the terminal arrangement of
the input and output terminal blocks, and other information.
Terminal Block Part Names and Functions
(C)
Letter
A Hole for securing wires
B Terminal hole
C Screw for securing
D Release hole
Refer to 5-4-8 Wiring to the CPU Unit Terminal Block on page 5-45 for the wiring procedure.
3 - 10
(A) (B)
(C)
(D)
Name Function
Pass a cable tie through this hole for securing the wires.
The wire is inserted into this hole.
Screw for securing the terminal block on the CPU Unit.
Insert a flat-blade screwdriver into this hole to connect and
remove the wire.
NX-series NX1P2 CPU Unit Hardware User's Manual (W578)