Omron NX1P2 series User Manual page 107

Additional Information
The Sysmac Studio cannot connect online to an NJ/NX-series CPU Unit in the following type of
configuration.
• If the built-in EtherNet/IP port is not used, you cannot connect to an NJ/NX-series CPU Unit
on an EtherNet/IP network.
Example: Connection to NJ/NX-series CPU Unit Routing through an EtherNet/IP Unit or Built-in
Port
• You cannot route through any networks other than EtherNet/IP networks.
NX-series NX1P2 CPU Unit Hardware User's Manual (W578)
Sysmac Studio
USB
CS1W-EIP21, CJ1W-EIP21,
CJ2 built-in EtherNet/IP port,
CJ2M built-in EtherNet/IP port
3 Configuration Units
EtherNet/IP
3
3 - 35