Omron NX1P2 series User Manual page 163

1
Turn OFF the power supply to the Controller.
If the CPU Unit has not been ON, turn it ON for at least five minutes and then turn it OFF.
2
Using a flat-blade screwdriver, remove the battery cover on the lower left corner of the CPU
Unit.
Precautions for Correct Use
The battery cover will come off. Be careful not to allow the cover to fall and get lost during
removal.
3
Connect the connector of the battery to the battery connector and insert the battery in the bat-
tery slot.
Battery connector
Battery slot
4
Press in the battery harness and attach the battery cover.
NX-series NX1P2 CPU Unit Hardware User's Manual (W578)
Flat-blade screwdriver
Connector
5 Installation and Wiring
5
5 - 31