Omron NX1P2 series User Manual page 294

6 Troubleshooting
Attached Attached information 1: Operation type
information
0101 hex: Controller to SD Memory Card for switch operation on front of CPU Unit
0102 hex: Controller to SD Memory Card for system variable operation
0103 hex: Controller to SD Memory Card for Sysmac Studio operation
0104 hex: Controller to SD Memory Card for instruction operation
0201 hex: Controller to computer
Attached Information 2: Error Details
0001 hex: An SD Memory Card is not inserted.
0002 hex: The SD Memory Card is faulty, the format of the SD Memory Card is not correct, or the SD Memory Card
0003 hex: The SD Memory Card is write protected.
0204 hex: SD Memory Card backup is prohibited.
0205 hex: Another backup operation is in progress.
0206 hex: Synchronization, online editing, or the Clear All Memory operation is in progress.
0207 hex: A prohibited character is used in the directory name that is specified in the system-defined variable.
0401 hex: The backup was canceled by the user.
0501 hex: The online connection with the Sysmac Studio was disconnected.
Precautions/ None
Remarks
6 - 76
is not the correct type of card.
NX-series NX1P2 CPU Unit Hardware User's Manual (W578)