Omron NX1P2 series User Manual page 224

6 Troubleshooting
Item
RUN out-
put on
Power
Supply
Unit
User pro-
gram exe-
cution
Operation
status
of NX1P2
CPU Unit Outputs
turned OFF
Error reset
Event logs
Outputs from EtherCAT
slaves and NX-series
Digital Output Units
Sysmac Studio display
(while online)
*1 If multiple Controller errors have occurred, the indicators show the error with the highest error level.
*2 Operation stops in the function module (Motion Control Function Module, EtherCAT Master Function Module, or Ether-
Net/IP Function Module) in which the error occurred.
6 - 6
Major fault level Partial fault level Minor fault level
OFF ON
Stops.
Continues.
Yes No
Not possible. Depends on the
nature of the
error.
Recorded. Recorded.
(Some errors are
not recorded.)
Refer to I/O • Errors in Ether-
Operation for CAT Master
Major Fault Function Mod-
Level Controller ule: Depends
Errors on page on settings in
6-8. the slave.
• Errors in other
function mod-
ules: Depends
on user pro-
gram.
Error messages are automatically displayed. You can
display detailed information in the Troubleshooting Dia-
log Box.
Event level
Controller errors
ON
*2 Continues.
No
Depends on the
nature of the
error.
Recorded.
Depends on the
user program.
NX-series NX1P2 CPU Unit Hardware User's Manual (W578)
Controller infor-
mation
Observation Information
ON ON
Continues. Continues.
No No
--- ---
Recorded. Recorded.
Depends on the Depends on the
user program. user program.
These items are not displayed in the
error display in the Controller Status
Pane.