Calibrate:internal:status - Tektronix TBS2000 Series Programmer's Manual

C commands

CALibrate:INTERNal:STATus?

Returns the current status of the instrument internal signal path compensation for
the last SPC operation. Query only.
Group
Calibration and Diagnostic
Syntax
CALibrate:INTERNal:STATus?
Related commands
*CAL? on page 53
Returns
INIT indicates the instrument has not had internal signal path calibration run.
PASS indicates the signal path calibration completed successfully.
FAIL indicates the signal path calibration did not complete successfully.
RUNNING indicates the signal path calibration is currently running.
Examples
CALibrate:INTERNal:STATus? might
return :CALIBRATE:INTERNAL:STATUS INIT indicating that the current
status of the internal signal path compensation is that it has not been run.
TBS2000 Series Programmer 57