Tektronix TBS2000 Series Programmer's Manual page 44

Command groups
26
Command
*ESR? on page 107
EVENT? on page 115
EVMsg? on page 116
EVQty? on page 117
*OPC on page 193
*PSC on page 195
*RST on page 204
*SRE on page 219
*STB? on page 220
on page 247
*WAI
Description
Returns the contents of the Standard Event
Status Register (SESR).
Returns from the Event Queue an event code
that provides information about the results of the
last *ESR? read.
Removes from the Event Queue a single event
code associated with the results of the last
*ESR? read, and returns the event code with an
explanatory message.
Return number of events in the event queue.
Generates the operation complete message in
the Standard Event Status Register (SESR)
when all pending commands that generate an
OPC message are complete.
Sets and queries the power-on status flag that
controls the automatic power-on handling of the
DESER, SRER, and ESER registers.
Resets the instrument to factory default settings.
(Service Request Enable) sets and queries the
bits in the Service Request Enable Register
(SRER).
(Read Status Byte) query returns the contents of
the Status Byte Register (SBR) using the Master
Summary Status (MSS) bit.
Prevents the instrument from executing further
commands or queries until all pending
commands that generate an OPC message are
complete.
TBS2000 Series Programmer