Horizontal:divisions; Horizontal[:Main][:Delay]:Position - Tektronix TBS2000 Series Programmer's Manual

Arguments

HORizontal:DIVisions

Group
Syntax

HORizontal[:MAIn][:DELay]:POSition

Group
Syntax
TBS2000 Series Programmer
<NR3> specifies the range from 1 (or 2) ns to 100 s, depending on the model.
Examples
HORIZONTAL:SECDIV 2E-6 sets the delay scale to 2μs per division.
HORIZONTAL:SECDIV ? might return :HORIZONTAL:DELAY:SECDIV
2.0000E-06 indicating that the delay scale is currently set to 2 μs per division.
Returns the current horizontal divisions: 15.0000. Query only.
Horizontal
HORizontal:DIVisions?
Examples
HORizontal:DIVisions? might return HORizontal:DIVisions 15.
Sets or queries the horizontal position. If Horizontal Delay Mode is turned off,
this command is equivalent to adjusting the HORIZONTAL POSITION knob on
the front panel. When Horizontal Delay Mode is on, this command stores a new
horizontal position that is used when Horizontal Delay Mode is turned off.
Horizontal
HORizontal:MAIn:DELay:POSition <NR1>
HORizontal:MAIn:DELay:POSition?
HORizontal:MAIn:POSition <NR1>
HORizontal:MAIn:POSition?
HORizontal:DELay:POSition <NR1>
HORizontal:DELay:POSition?
HORizontal:POSition <NR1>
HORizontal:POSition?
H commands
151