Table of Contents
Advertisement
Chapter 1
Overview
Note
To meet the electromagnetic interference (EMI) requirements, special UTP cables (with ferrites) should
be used for SUP Console and Auxiliary ports.
TCP/IP-based management services available through inband access also are provided through this port
(Telnet and SNMP). This management port also supports image download.
Note
The 10/100 BASE-T Ethernet management ports are for network management only. These ports do not
support network switching.
Supervisor Memory
The Cisco RFGW-10 Supervisor provides 512-MB SODIMM SDRAM, 64-MB flash memory, and
512-KB NVRAM.
Cisco RFGW 10 Supervisor Engine 7-E
Starting with Cisco IOS-XE Release 3.2.0SQ, the Cisco RFGW-10 supports a new supervisor engine for
the Cisco RFGW-10 DS-384 line card.
Note
The Cisco Supervisor Engine 7-E also supports the DS-48 line card.
Figure 1-10
major features identified.
Figure 1-10
OL-16264-04
and
Figure 1-11
show the faceplate and front view of the Supervisor Engine 7-E with the
Faceplate - Cisco RF Gateway 10 Supervisor Engine 7-E for the Cisco RFGW-10 DS-384 Line
Card
Cisco RF Gateway 10 Hardware Installation Guide
Cisco RFGW-10 Components
1-17
Advertisement
Table of Contents
