Table of Contents
Advertisement
Chapter 1
Overview
Cisco RFGW-10 Components
Note
There are two LEDs for each DTI port (ACK and LINK). Only one of these can be on at a time.
The upper LED (ACK) indicates whether the RFGW-TCC is connected (linked) with the DTI server. It
does not indicated a frequency lock with the DTI server. Yellow illumination indicates a positive
communication link with the server. The lower LED (LINK) can either be green or off. When green, it
indicates that the DTI client has established connection with the server and the frequency is locked.
A typical transition of the LEDS is the ACK LED illuminates yellow (linked) after the system comes up
and when the DTI frequency is locked, the ACK LED becomes off and the LINK LED illuminates green.
Figure 1-13
and
Figure 1-14
show the TCC/DTI Card.
Figure 1-13
TCC Card Faceplate
Cisco RF Gateway 10 Hardware Installation Guide
1-26
OL-16264-04
Advertisement
Table of Contents
