Table of Contents
Advertisement
Cisco RFGW-10 UEQAM Installation
This chapter describes the Cisco RFGW-10 Universal Edge QAM (UEQAM) and provides the
procedures for installing the Cisco RFGW-10 UEQAM in the equipment racks. It also describes how to
connect the interfaces and power cables.
This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
•
•
•
Cisco RFGW-10 UEQAM Description
The Cisco RFGW-10 UEQAM supports multiple card modules. It is designed with a single midplane
with modules connecting on both sides of the midplane. It supports:
•
•
•
•
•
•
•
OL-16264-04
Cisco RFGW-10 UEQAM Description, page 3-1
Installation Methods, page 3-4
General Rack Installation Guidelines, page 3-4
Rack-Mounting a Cisco RFGW-10 UEQAM, page 3-5
Installing the Chassis Installation Brackets, page 3-6
Installing the Chassis Installation Handles, page 3-7
Attaching the Chassis Rack-Mount Brackets, page 3-9
Installing the Cisco RFGW-10 UEQAM in a Rack, page 3-12
Attaching a Chassis Ground Connection, page 3-18
Attaching the Cable-Management Bracket, page 3-20
Connecting Power to Cisco RFGW-10 UEQAM, page 3-21
Connecting the Lineage Power Shelf to the Cisco RFGW-10, page 3-28
2 TCC cards
12 RF switch card slots
10 Cisco RFGW-10 Universal RF Cards
2 Cisco RFGW-10 UEQAM Series Supervisors
Dual (redundant) DC PEM
1 fan tray module
1 front panel display
C H A P T E R
Cisco RF Gateway 10 Hardware Installation Guide
3
3-1
Advertisement
Table of Contents
