Document Objectives - Cisco RFGW-10 Hardware Installation Manual

Document Objectives

This publication describes Cisco RF Gateway 10 (RFGW-10) Universal Edge Quadrature Amplitude
Modulation (UEQAM) installation, and replacement or upgrading of field-replaceable units (FRUs). The
purpose of this guide is to enable a safe and efficient installation of the Cisco RFGW-10 UEQAM.
Audience
This publication is primarily designed for the person responsible for installing, and maintaining the
Cisco RFGW-10 UEQAM. The users of this guide should:
•
•
•
Document Organization
The major sections of this installation guide are:
Section
Chapter 1, "Overview"
Chapter 2, "Preparing Your Site for Installation"
Chapter 3, "Cisco RFGW-10 UEQAM Installation"
Chapter 4, "Thermal Management"
Chapter 5, "Installing and Removing FRUs"
Chapter 6, "Cabling the Cisco RFGW-10 UEQAM"
Chapter 7, "Cisco RFGW-10 UEQAM System Specifications"
Cisco RF Gateway 10 Hardware Installation Guide
2
Be familiar with electronic circuitry and wiring practices.
Have experience as electronic or electromechanical technicians.
Have experience in installing high-end networking equipment. Certain procedures described in this
guide require a certified electrician.
Description
This chapter provides an overview of the Cisco
RFGW-10 UEQAM.
This chapter provides site preparation guidelines for
installing the Cisco RFGW-10 UEQAM.
This chapter describes the installation procedures of the
Cisco RFGW-10 UEQAM.
This chapter describes thermal management of the Cisco
RFGW-10 UEQAM.
This chapter describes the installation and removal
procedures for the field-replaceable units (FRUs).
This chapter describes the cabling information for the
Cisco RFGW-10 UEQAM.
This chapter lists the specifications of the Cisco
RFGW-10 UEQAM.
OL-16264-04