Objectives; Organization - Cisco DPA 7630 Administration Manual

Objectives

Objectives

Organization

Table 1 Cisco Digital PBX Adapter 7630 Administration Guide Organization
Chapter
Chapter 1, "Overview"
Chapter 2, "Choosing an Integration Mode"
Chapter 3, "Installing the DPA 7630/7610"
Chapter 4, "Preparing the
Cisco CallManager and Octel Systems"
Chapter 5, "Getting Started with the
DPA 7630/7610"
Chapter 6, "Configuring Telephony
Settings"
Chapter 7, "Troubleshooting the DPA
7630/7610"
Appendix A, "Technical Specifications"
Appendix B, "Translated Safety Warnings"
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
xiv
This guide provides the required steps to get the DPA 7630/7610 up and running
on the IP telephony network. Because of the complexity of an IP telephony
network, this guide does not provide detailed information for required procedures
performed on other Cisco or third-party applications or devices. Refer to the
documentation included with these systems for instructions.
Table 1 provides an overview of the organization of this guide.
Description
Provides conceptual overview of the DPA 7630/7610,
explanation of how the device interacts with other
components in the IP telephony network.
Explains different scenarios and configurations by which
you can add the DPA7630/7610 to your network.
Describes the steps required to properly and safely install
and configure the DPA 7630/7610 in your network.
Provides details about information required from the
Cisco CallManager and Octel systems.
Provides procedures for configuring network settings
and verifying status on the DPA 7630/7610.
Provides procedures for configuring settings on that
depend upon Cisco CallManager, Octel, and the PBX.
Provides diagnostic and troubleshooting suggestions for
the DPA 7630/7610.
Provides a reference of the detailed technical
specifications.
Provides translations of safety warnings used in this
guide.
About This Guide
78-11069-03