Two-Way Recording Button Assignment Via Station Programming - Panasonic KX-TVP200 Installation Manual

The Live Call Screening Cancel Button Assignment is optional; Live Call Screening can also
be cancelled by Pressing the FLASH button.
4.4.9 Two-Way Recording Button Assignment via Station
Programming
For the Two-Way Recording feature to work at an extension, the extension must have a TWR
button on it. This key must either be a DSS/BLF or CO key with a lamp. Follow the procedure
below to assign a TWR button on an extension. (This is a station level programme and should
be done at each individual telephone.)
PC programming is also available for KX-TD500 users (see 4.4.12 Button Assignment via
PC Programming).
1.
Enter PITS Programming:
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
2.
Press the Flexible button (CO or DSS/BLF) that you want to assign as the TWR button.
3.
Dial [90].
Screen output: 2Way-Rec:
4.
Dial the Voice Mail extension number.
Screen output: 2Way-Rec: _ _ _
(_ _ _ = The extension number you entered).
5.
Press Store.
6.
To exit the Station Programming mode, Press the PROGRAM button or lift the handset.
7.
Repeat these steps for each telephone.
Conditions:
Installation Manual
INTEGRATING THE VPS WITH THE PANASONIC KX-TD DIGITAL PBX
This button must be a CO or DSS/BLF key to be
programmed as a TWR button. If this key is pressed
when all Voice Mail ports are busy, the user will hear a
reorder tone.
99