Panasonic KX-TVP200 Installation Manual page 253

Caller ID Call Routing-Enter
To access the proper menu for Caller ID Call Routing-Enter, follow the menu path
as shown:
System Administration Top Menu-1-4-3-1-Caller ID List No.(1-120)
Parameter
Caller ID No.
Description
Call Transfer
Installation Manual
Value Range
(Default)
P, O or Assigns the telephone number to which the VPS applies
Up to 20 digits
automatic forwarding to a desired destination. " "
consisting of 1-9,
substitutes any number (=wild card). For example, to
0,
route all calls from Area Code 201, enter "201
(None)
To have a "Private" call automatically forwarded to a
desired destination, enter "P".
For an "Out of Area" call, enter "O".
Up to 20 Enters a name and/or description of the Caller ID number.
characters Any ASCII character (except "\") can be used.
(None)
Note: When nothing is registered in this parameter but the
caller's name is transmitted from the Central Office, the
name will be automatically registered in this parameter.
When this is done, an asterisk " " will appear with the
Call Transfer parameter if "PUTD" is enabled. See
7.2.19 Touchtone Information Display (PUTD) for
more information. For example, you might see this:
"Custom 3 ". This indicates the name was automatically
registered in the VPS.
Custom/Extn./ Specifies the destination to which the call from an
Mbx assigned Caller ID number is automatically forwarded.
(None) The "Custom" setting (enter "C") forwards callers to the
specified Custom Service menu. The "Extn." setting
(enter "E") forwards callers to the specified extension.
The "Mbx" setting (enter "M") enables callers to leave
messages in the specified mailbox. A System Group
Distribution List number can be specified here instead of
a mailbox number.
SYSTEM ADMINISTRATOR'S GUIDE
Table 49
Description/Function
".
253