Panasonic KX-TVP200 Installation Manual page 80

INTEGRATING THE VPS WITH THE PANASONIC KX-TD DIGITAL PBX
4.
Assignment of the extension ports connected to the VPS
a)
Continue the programming in the "1-4 VPS (DPT) Port Assignment" screen.
b)
Select the extension port number of the card (DLC/DHLC) to which the VPS (DPT) jack
is to be connected in the "Port No." menu.
c)
Assign "DN" for the port (click "DN Refer" to check the available directory numbers).
d)
Assign "Extension Group No." for the port.
e)
Click "Apply" to save the changed data.
f)
Set "Status" to "INS".
80
Notes:
• You can assign a maximum of 6 jacks (12 ports) with the KX-TD500.
• This menu is displayed only when the attribute of the ports is assigned to "VPS
(DPT)" in step 2.
• This programme tells the KX-TD500 which extension ports are connected to the
VPS. This allows the KX-TD500 to send the proper Digital Integration
information to these ports.
• Jack No.1 must be assigned, because its port is used as the channel to control
the VPS.
Note:
This programme allows you to assign an extension number to each Voice Mail port.
Since each port connected to the VPS provides two extensions, this enables you to
assign extension numbers to each port. To reach the Voice Mail system, users dial
these extension numbers.
Note:
Specify the extension group number (126 or 127 by default) to which VM or AA is
assigned. Group numbers 1 to 128 are available to the VPS through additional
programming.
(Selecting VM has the same effect as selecting AA, regardless of how the VPS is
programmed.)
Installation Manual