Kx-Td1232 Software Verification And Programming For Dpt Integration Via The Operating And Maintenance Tool - Panasonic KX-TVP200 Installation Manual

INTEGRATING THE VPS WITH THE PANASONIC KX-TD DIGITAL PBX
The required programming is complete and the VPS and KX-TD1232 should be able to
communicate through DPT Integration.
We recommend that the KX-TD1232 system has any optional extension cards installed and
telephones connected before starting the VPS.
When running the Quick Setup command (Section 5 CUSTOMISING THE SYSTEM) from
the VPS, the PBX transmits the station information automatically. This saves time when
programming the VPS.
4.3.2 KX-TD1232 Software Verification and Programming for DPT
Integration via the Operating and Maintenance Tool
Follow these steps after communication between the KX-TD1232 and the programming
software has been established. Refer to the Operating and Maintenance manual for
connection information.
1.
Check the software version.
a)
Go to the Main Menu. Press the ALT key and the letter [V] at the same time.
b)
Verify the Operating and Maintenance version being used.
Sample display:
c)
Verify the ROM version of the KX-TD1232.
Example: P231UYMMDDB
This version must be at least version P231U or higher for DPT Integration to be utilised
(both systems if system connection is being used).
(For KX-TD816, the version must be at least version P301O or higher for DPT
Integration to be utilised.)
90
DB data (PC): Empty
Version:3.60X
This version must be 3.60X or higher to program the KX-TD1232 for DPT
Integration.
Note
If you have an older version of the maintenance tool but have the correct ROM
version in the system, you may still program the KX-TD1232 but you must program
using the Manager's Extension.
Installation Manual