Panasonic KX-TVP200 Installation Manual page 81

5.
To set the trunk (outside line) features, follow the instructions in "Settings for the trunk
(outside line) features" (3.3.3 KX-TD500 Programming for Inband Integration in
3.3 CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs).
6.
Connect the jack assigned in Step 4 to the VPS.
7.
Connect your personal computer to the VPS and start your communication software (i.e.,
HyperTerminal, Procomm Plus, Smartcom...).
Communication Parameters: 9600, 8 Bit, None, 1
8.
Turn the power switch off at the VPS and set the Rotary Switch to position 5.
Only perform this step when initially setting up the system.
CAUTION
Setting the Rotary Switch to position 5 will default the Voice Processing System, resulting in
a loss of all user programming and voice messages (except User 1 and User 2 prompts).
Installation Manual
INTEGRATING THE VPS WITH THE PANASONIC KX-TD DIGITAL PBX
Screen output:
81