Panasonic KX-TVP200 Installation Manual page 271

Parameter
Outgoing Call
Setup
Sequence
Other Parameters-Message Waiting Notification
Controls the handling of message waiting notification calls.
To access the proper menu for Message Waiting Notification Parameter, follow the
menu path as shown:
System Administration Top Menu-1-5-7-3
Parameter
Outgoing Call
Ports
Installation Manual
Value Range
(Default)
Up to 12 digits Specifies the sequence of codes used by the VPS when
consisting of calling an outside (CO) line. You can set up to 12
digits. The default value is "T". "T" indicates that the
0-9, , #, F, R, S, T,
system will dial the telephone number only after
W
detecting a dial tone.
(T)
Example:
9W = (9) - 1-s wait - dial telephone number. "9" is the
outside (CO) line access number.
F: Hook Flash
R: Ringback Tone Detection
S: Silence Detection
T: Dial Tone Detection
W: Wait for 1 s
1-9, 0, , #: Dial Codes
Value Range
(Default)
Port No. Specifies the port numbers used for the Message Waiting
(1-12) Notification Device feature. The VPS makes outgoing
calls using the port specified in this parameter. At least 1
port must be specified.
SYSTEM ADMINISTRATOR'S GUIDE
Table 61
Description/Function
Table 62
Description/Function
271