Panasonic KX-TVP200 Installation Manual page 113

To go to the next screen without assigning the password, Press ENTER.
7.
Date and Time Setting
Screen output:
Quick Setup-Time Setting
Enter the time (hour, minute in 2 digits, comma and A or P) and date (day, month and
year in 2 digits).
To go to the next screen, Press ENTER.
8.
Activating the Quick Setup
Screen output:
Quick Setup - Setup
To set up the mailbox and restart, select 'Yes.'
To cancel and exit, select 'No.'
1: Yes
To activate the Quick Setup, Press [1] and Press ENTER.
Note
To cancel the Quick Setup, Press [2] and Press ENTER. This cancels all changes
made up to this point.
The VPS begins to change system programming data.
Screen output:
Quick-Setup
Then "CARD TEST..." "SYSTEM SETUP..." and "1...2...3..." appear on the screen one by
one.
Screen output:
Installation Manual
Current time is 3:04, PM
Enter new time (HH:MM, AM/PM) : =
Current date is MON 1-JAN-2001
Enter new date (DD-MM-YY) : =
2: No
To set up the mailbox and restart, select "Yes."
To cancel and exit, select "No."
1: Yes
Setup 998...
CARD TEST ...
SYSTEM SETUP ...
1 ... 2 ... 3 ...
2: No
CUSTOMISING THE SYSTEM
113