Panasonic KX-TVP200 Installation Manual page 285

Parameter
Operator
Transfer
Sequence
Extension
Transfer
Sequence
Alternate
Extension
Transfer
Sequence
Reconnect
Sequence on
Busy
Reconnect
Sequence on
No Answer
Reconnect
Sequence on
Refuse Call
Light-On
Sequence for
Message
Waiting Lamp
Light-Off
Sequence for
Message
Waiting Lamp
Call Waiting
Sequence
Release
Sequence for
Call Waiting
Installation Manual
Value Range
(Default)
The VPS performs this sequence when transferring calls
(FX) to the operator's extension.
The VPS performs this sequence when transferring calls
(FX) to any extension except the operator's.
The VPS performs this sequence when transferring calls
to extensions in the Alternate Extension Group.
(FX)
If an extension is busy, this sequence allows the VPS to
(F) reconnect to the caller.
If the extension does not answer, this sequence allows the
(F) VPS to reconnect with the caller.
The VPS performs this sequence to retrieve a call placed
(F) on hold after the extension (in the Call Screening mode)
has refused to accept it.
This is the dialling sequence that the VPS must perform to
enable the Message Waiting Lamp at an extension.
(None)
This is the dialling sequence that the VPS must perform to
disable the Message Waiting Lamp at an extension.
(None)
The VPS carries out this sequence when performing call
(1)
waiting if the extension being called is busy.
The VPS performs this sequence to release call waiting.
(F)
SYSTEM ADMINISTRATOR'S GUIDE
Table 74
Description/Function
285