Panasonic KX-TVP200 Installation Manual page 278

SYSTEM ADMINISTRATOR'S GUIDE
Parameter
Fax No Answer
Time
Fax Manager
Mailbox No.
Fax No Answer
Coverage Mode
Fax Notification
Mode
278
Value Range
(Default)
5-60 s Specifies the length of time (in seconds) the VPS must
(10) wait before taking other action when there is no answer at
either fax extension.
Note: This timer applies to the fax call that has been
transferred to the main or alternate fax extension.
2-5 digits Specifies the Fax Manager Mailbox Number. The VPS
(None) will notify the fax manager of the status of fax calls
depending upon the settings of the "Fax No Answer
Coverage Mode" and "Fax Notification Mode "
parameters.
1. No If set to "Mbx", the VPS will leave the number of
2. Mbx unanswered fax calls in the Fax Manager's mailbox.
3. Ext
(No)
Example: "The FAX transfer situation is as follows. One
attempt was no answer".
1. If set to "Ext", the VPS will call the Fax Manager's
extension to specify the number of unanswered fax
calls received.
2. If set to "Mbx", the VPS will leave the number of
unanswered fax calls in the Fax Manager's mailbox.
3. If set to "No", the VPS will take no action concerning
unanswered fax calls.
1. No If set to "Mbx", the VPS will leave the number of
2. Mbx successfully received fax calls in the Fax Manager's
3. Ext mailbox.
(No)
Example: "You have 1 FAX message".
1. If set to "Ext", after a fax extension successfully
receives a fax call, the VPS will automatically call the
Fax Manager's extension and play a voice prompt:
"You have 1 FAX message". The VPS will also leave
the total number of received fax calls in the Fax
Manager's mailbox.
2. If set to "No", the VPS will not take any action
concerning successfully received fax calls.
Table 67
Description/Function
Installation Manual