Panasonic KX-TVP200 Installation Manual page 234

SYSTEM ADMINISTRATOR'S GUIDE
Parameter
Message
Retrieval Order
Message
Scanning with
Information
Prompt Mode
Remote Call
Forward to CO
Delete
Message
Confirmation
234
Value Range
(Default)
1. LIFO Specifies the order in which messages will be retrieved
2. FIFO (played back for listening).
(LIFO)
1. LIFO—Messages are retrieved starting with the most
recent.
2. FIFO—Messages are retrieved starting with the oldest.
1. Yes If set to "Yes", the VPS adds the message sender's name and
2. No the recording date and time to the message during the
(No) message scan.
1. System Specifies the language used for voice prompts.
2. User 1
3. User 2
Note: If User 2 is specified as Prompt Mode but not
(System)
recorded by the Message Manager, the VPS will
automatically play the factory-recorded System prompts in
English. By default, User 2 prompts are recorded in
Portuguese.
1. Yes If set to "Yes", Remote Call Forwarding can be set to an
2. No outside (CO) line; the Message Manager can program his
(No) extension from a remote location to forward various types of
calls to either "Telephone No.1" or "Telephone No.2"
(preprogrammed in the Mailbox Setting), or to any other
telephone number.
Note: The Remote Call FWD to CO feature is available if
DPT Voice Mail Integration is activated with a Panasonic
KX-TD series telephone system.
Important Note: With respect to PBX programming, it is
possible that "Call Forward to CO" is disabled. To enable
VPS Remote Call Forwarding, the KX-TD1232, for
example, must be programmed properly. For the COS of the
extensions whose calls are to be forwarded to an outside
(CO) line, enable the following: [504] Call Forward to
Outside Line.
1. Yes If set to "Yes", the VPS requests confirmation from the
2. No mailbox owner before erasing a message left in the mailbox.
(No) If set to "No", the message is erased immediately.
Table 40
Description/Function
Installation Manual