Panasonic KX-TVP200 Installation Manual page 244

Voice processing system
Hide thumbs Also See for KX-TVP200:
Table of Contents

Advertisement

SYSTEM ADMINISTRATOR'S GUIDE
Parameter
No Answer
Coverage
Mode
Message
Repeat Cycle
Note
Extension Call Forwarding to the VPS can override the operator call coverage settings
depending on the timing parameters of the PBX and VPS. Even if the operator call coverage
parameters are set to "Next Operator" on Busy/No Answer, the call may go to the VPS (if
the Operator has set the call forwarding to the VPS).
Operator's Parameters-Day Mode-Operator 2
Operator 2 receives operator-seeking calls when Operator 1 is busy or does not answer and
Operator 1's parameters are set as follows:
• Busy Coverage Mode—No Answer Coverage
• No Answer Coverage Mode—Next Operator
To access the proper menu for Operator Parameters-Day Mode-Operator 2, follow
the menu path as shown:
System Administration Top Menu-1-4-1-2-1-2
244
Value Range
(Default)
1. Caller Select
Specifies how to handle Operator 1 calls when not
2. Leave Message
answered within the time period set by the "Operator No
3. Disconnect
Answer Time" mode.
Message
4. Next Operator
1. Caller Select—Allows the caller to leave a message or
(Caller Select)
2. Leave Message—Instructs the caller to leave a
3. Disconnect Message—Disconnects the caller after
4. Next Operator—Transfers the caller to Operator 2.
1-3 times
Specifies the number of times the VPS will play the
(3)
Automated Attendant top menu.
Table 44
Description/Function
call another extension. (In some cases, a call to another
extension is not available. For more information, see
the "Note" on "Caller Select" in Table 22 in
5.4.3 Operator's Parameters.)
message in Operator 1's mailbox.
playing "Thank you for calling".
Installation Manual

Advertisement

Table of Contents
loading

Table of Contents