Panasonic KX-TVP200 Installation Manual page 33

To Mount on a Concrete or Mortar Wall:
1.
Place the template on the wall to mark the 3 screw positions.
2.
Drill 3 holes and drive the anchor plugs (included) with a hammer, flush with the wall.
To the wall surface
3.
Install the 3 screws into the anchor plugs.
4.
Hook the unit on the screw heads.
Installation Manual
Template
Anchor Plug
29 mm
(1-1/8 inch)
Drive the screw
to this position.
Concrete or
Mortar Wall
6.4 mm
(1/4 inch)
INSTALLATION
33