Which Phone Systems Are Compatible - Panasonic KX-TVP200 Installation Manual

VOICE PROCESSING SYSTEM OVERVIEW
Position
7
8
9
* For Panasonic KX-TD series telephone systems with DPT Integration
To change the position, use a pointed object, such as a pen, etc.
When setting the Rotary Switch to any position (except 0):
1. Disconnect the station wire(s) and wait a few minutes.
2. Turn the power switch off at the VPS.
3. Set the Rotary Switch.
4. Turn the power switch back on at the VPS.
5. Connect the station wire(s) to the VPS and wait approximately 5 min.
6. Return the Rotary Switch to position 0.
Hard Disk Drive:
(One/system) Stores the proprietary system programme, the system administration table, and
the voice prompts (about 50 min worth); has the recording area for the messages from callers.
(The hard disk is controlled by the central micro processor.)
Note: The actual Hard Disk Drive mounted on your VPS may look different from the one
shown in the corresponding illustration provided in the beginning of this section.
CPU Board:
(One/system) Main processing unit for the system. Comprised of central microprocessor,
ROM, dynamic RAM, system controller, Rotary Switch, and an RS-232C interface.

1.3.3 Which Phone Systems are Compatible?

We recommend integration with the following Panasonic phone systems:
• Panasonic KX-TD500
• Panasonic KX-TD1232
• Panasonic KX-TD816
• Panasonic KX-TA series
18
Table 1
Additional Function
Reserved
Initializes the VPS. Clears all voice data and
returns all system parameters to the default setting.
CAUTION: User 1 and User 2 Prompts will be
erased!
Reserved
Installation Manual