Table of Contents
Advertisement
2-2 Rear panel
ANT
This is the antenna input for the SR2000A. The connector is a BNC type. Use 50ohm
cable to connect your antenna.
DC 12V
The supplied power unit is terminated with a center positive (+) polarity connector.
PHONES
Headphone jack (3.5mm stereo type):
A pair of headphones or earphones may be connected.
When this headphone jack is used, the internal speaker will be automatically disabled.
EXT.SP
External speaker jack: This 3.5mm mono jack provides audio output to drive an external
speaker unit. This unit should have a nominal 8 ohm impedance and power handling of 2
watts or greater.
VIDEO OUT
This RCA connector provides the composite video output. An external video monitor may
be connected.
ACC
Accessory connector: Provides output for audio and the discriminator. See below.
7
Advertisement
Table of Contents
