Table of Contents
Advertisement
Lower frequency limit (L-FREQ)
Enter the search lower frequency limit. Press the MHz key to confirm.
Higher frequency limit (H-FREQ)
Enter the search higher frequency limit. Press the MHz key to confirm.
Receive mode (MODE)
Using the dial knob, select the desired receive mode. Then press the MHz key to confirm.
Frequency step (STEP)
Choose your desired frequency step in KHz with the dial knob. Then press the MHz key to
confirm.
Bank text (TEXT)
You can name each search bank, as described in paragraph 8-4.
To save all selections:
Press and hold the MHz key for two seconds. After the search bank set up is
completed, the SR2000A will start the normal search.
To leave this screen without saving any changes:
Press the CLR key.
10-2 Normal Search
Search (SRCH)
Activate the search with the FUNC key followed by the 2 key, and it will start searching in
the frequency range you have specified in the search bank menu (paragraph 10-1).
The two digit bank channel can be changed while search is active.
Search is resumed manually either with the MHz key to go up, or KHz key to go down the
frequency range.
EXAMPLE OF SEARCH BANK 03 UNDER PROCESS
BANK TEXT DESCRIPTION
41
Advertisement
Table of Contents
