In this example, memory "mem 0-03" is chosen.
Accessing a selection (S SET)
Once you are in the Memory Read mode screen as plotted above, the selected memory
Scanning mode can be accessed by pressing the FUNC key followed by the 6 key. The
SEL icon will appear on the top of the screen.
Activating select scan (S SCAN)
Press the FUNC key followed by the 5 key to activate the scanning of the selection you
have previously accessed. There must be at least one channel in the memory bank, for the
scanning mode to function.
You can select any of the detected frequencies and copy it onto the VFO screen for live
analysis. To do so, select the desired frequency with the white triangle by using the UP
or DOWN soft keys, then press the SET FREQ. soft key.
To copy a frequency to the VFO mode screen:
Move the cursor with the UP or DOWN soft keys.
Press the SET FREQ. soft key.
37