by pressing the MHz key.
When FFT search is operating, the resolution bandwidth
(RBW) is automatically set to 4 KHz.
11 Delete menu
The SR2000A allows convenient deletion of search banks, memory banks, memory channels,
pass banks and pass frequencies in one single Delete menu.
To access the Delete menu function, press the FUNC key, then press the 8 key.
As in the plot below, move the cursor to the desired selection with the UP or DOWN soft
keys, then press the DELETE soft key to delete your selection.
THE CONTENTS OF THE
SELECTION ARE
DISPLAYED
Search bank (SRCH-BANK)
Use the numeric keys to enter the two digit number of the search bank you wish to delete.
Memory bank (MEM-BANK)
Use the numeric keys to enter the one digit number of the memory bank you wish to delete.
All frequencies in this bank will be deleted.
Memory channel (MEM-CH)
Use the numeric keys to enter the three digit of the memory bank/channel you wish to
delete. Only the frequency assigned to this channel will be deleted.
Pass bank (PASS-BANK)
[Caution!]
PUSH TO DELETE
46