Table of Contents
Advertisement
Nonstop search
If you press again the FUNC key and 2 keys while the search is active (as plotted above),
You will enter the Nonstop search mode.
The SR2000A will continuously search in the frequency range you have specified.
You can exit that mode by repeating the same steps. As the screen can only display
30 frequencies on the screen, new frequencies will overwrite the older ones.
You can pick up any of the detected frequencies and to the VFO screen for live analysis.
To do so, select the desired frequency with the white triangle by using the UP and DOWN
soft keys, then press the SET FREQ. soft key.
Move the cursor with the UP or DOWN soft keys. Press the SET FREQ. key.
10-3 Frequency Pass setup
Frequency Pass allows individual frequencies to be passed so they will be skipped over
when in normal search mode (including nonstop search). Each of 40 search banks have
50 pass frequencies for a total of 2000.
NONSTOP (CONTINUOUS) SEARCH
To copy a frequency to the VFO screen:
IF PASS FREQUENCIES ARE PRESENT IN THE
SEARCH BANK, THE [PASS] ICON APPEARS.
42
Advertisement
Table of Contents
