Computer Control Information - AOR SR2000A Instruction Manual

Use the numeric keys to enter the two digit number of the pass bank you wish to delete.
All frequencies in this bank will be deleted.
Pass frequency (PASS-FREQ)
Use the numeric keys to enter the three digit number of the pass bank/frequency you wish to
delete. Only the selected frequency will be deleted.
Each time you press the DELETE soft key, the screen returns to the previous mode.
To quite the Delete menu without applying changes, press the CLR key.
To access the Delete menu:
To delete entries:
To quit without saving changes:

12 Computer control information

Your SR2000A is fully controllable by PC via the RS-232C serial interface or the USB
interface. No specific hardware interface is required, just a straight RS-232C cable or USB-A
to USB-B interface cable.
The RS-232C port uses a DB-9 connector.
The SR2000A RS-232C specification is as follows:
Baud rate:
Data bits:
Stop bits:
Parity:
Flow control:
Delimiter
PC SR2000A
<CR> (0x0d)
or
<CR><LF> (0x0d 0x0a)
Note: <LF> will be ignored
SR2000A PC
"OK" response when the command has been correct:
<SP><CR><LF> (0x20 0x0d 0x0a)
Response when the command has been incorrect:
? <CR><LF>
Press the FUNC key, then press the 8 key.
Press the DELETE soft key.
Press the CLR key.
9600/19200/38400/57600/115200 bps
8
2
None
RTS / CTS
(0x3f 0x0d 0x0a)
47