Table of Contents
Advertisement
GR Select memory list read
Acquisition: GRnn<CR>
HV Video output horizontal position
Setup: HVn<CR>
Acquisition: HV<CR>
LC Automatic Signal strength output
Setup: LCn<CR>
Acquisition: LC<CR>
LM Signal strength read out
Acquisition: LM<CR>
The response value depends on squelch type NSQ or LSQ.
In the NSQ mode: ATx AMy NSQm LMnnn
In the LSQ mode: ATx AMy LSQm LMnnn
ATx: x refers to command AT.
AMy: y refers to command AM.
MA Memory channel data read
Acquisition: MAmnn<CR>
Response value as follows:
MXmnn GAn RFnnnnnnnnnn MDn SQn ATn AMn TMxx...
(Note: Refer to the SQ command for detail.)
MB Memory bank delete
Setup: MBn<CR>
nn = 00 ~ 99 (channel number)
nn = %% (all channels)
nn must be in two digits format
n = 0~49
n = 0 (left end of the screen)
Response value : HVnn (fixed length)
n = 0 (no output)
n = 1 (output open) Default : 0
Response value : LCn
m = 0 (squelch closed)
m = 1 (squelch open)
nnn = 000 ~ 999
m = 0 ~ 9 (bank number)
nn = 00 ~ 99 (channel number)
MXmnn : m = 0 ~ 9
nn = 00 ~ 99 (channel number)
GAn: n refers to command GA
RFnnnnnnnnnn : nnnnnnnnnn (Hz)
MDn: n refers to command MD.
ATn: n refers to command AT.
AMn : n refers to command AM.
TMxx... : xx... message of maximum 12 letters.
MXmnn represents blank channels.
n = 0 ~ 9 (bank number)
Command valid only for setup.
Default : 16
53
Advertisement
Table of Contents
