Press the FUNC key, then press the ATT key.
Signal strength corresponds to the height of each signal in the vertical
scale. Therefore, the color will vary when the input sensitivity
(amplitude) has been altered in the course of monitoring.
Waterfall color corresponds to the vertical height.
Signal display is scrolling downwards as time progresses.
6-1-10 Selecting the operation modes
The SR2000A has 3 different operation modes which can be selected by pressing the FUNC
key followed by the 0 key. The soft keys below the screen give you access to each
corresponding mode. The channel scope mode is only available in the VFO seek mode.
Press the FUNC key, then press the 0 key.
Then select one of the three modes by pressing the corresponding soft
key.
1. Spectrum analyzer mode (Spectrum)
2. Step resolution mode (StepReso)
3. Channel scope mode (Channel)
Activate the waterfall function:
Select the operation mode menu:
Operation modes:
-----------------------
SOFT KEYS --------------------------
OPERATION MODE
21