[Note]
[MK.F] key functions:
In the spectrum analyzer and step resolution mode, pressing the MK.F key
forces the marker frequency to become the center frequency.
In the channel scope mode, pressing the MK.F key will not become the
center frequency. The MK.F key cannot be used in the Peak Detection
mode.
6-4 Calculation function
Pressing the FUNC key followed by the RBW key allows you access to three (3) calculation
features: Maximum value hold (MAX), Average value (AVR) and Median (MED) value.
Each function is then accessible through the corresponding soft key below the LCD.
Note this function is available in the WSP mode and the memory channel mode.
Maximum value hold (MAX)
Press the MAX soft key to access this feature, and the MAX icon will be displayed.
To exit from this feature, press the FUNC key, then press the RBW key, and press the MAX
key.
With the MAX function in use, each sweep will be retained as data and build-up until the
process ends. This is particularly useful to detect intermittent signals which come
and go over a period of time.
27