Table of Contents
Advertisement
Peak detection (Peak : PEK)
This feature is used to detect the most powerful signal while sweeping the frequency range.
Press the PEAK soft key, which in turn requests a trigger level. You need to specify what
level is required. Enter the trigger level via the numeric keys. Only signals which are
stronger than the trigger level you specified will then be subject to peak detection.
The marker will be forced to the position of the strongest signal detected and end its
sweep sequence.
While no signal above the trigger level is received,
Continuous peak detection (C-PEAK :CPK)
This function is designed to continue the peak signal detection process one sweep after
another.
Press the C-Peak soft key to activate the function.
There is no trigger level setup in this process.
the TRIG. WAIT is displayed.
26
Advertisement
Table of Contents
