Table of Contents
Advertisement
Bank channel (BANK-CH)
An available bank and memory channel are automatically selected (bank 0 by default, as
long as there are available channels). It is possible to choose another bank/channel with
the numeric keys.
Frequency (FREQ)
The frequency automatically displayed is the one which was active in your previous VFO
mode. You can input any other frequency with the numeric keys followed by the MHz key.
Receive mode (MODE)
The automatically displayed receive mode is the one which was active in your previous
VFO mode. You can choose another mode with the dial knob, followed by the MHz key.
Memory text (TEXT)
If desired, a text of up to 12 characters can be associated with your selected frequency.
Consult the following paragraph 8-4 about how to input.
To save all your selections:
To leave this screen without saving any changes:
8-4 Memory text input
A text of up to 12 characters can be assigned to each memory channel. To access the
memory text screen, press the MHz key when the TEXT line is selected by reverse
contrast in the memory programming screen (as plotted in previous paragraph 8-3).
To select the receive mode:
Rotate the dial knob, and press the MHz key to
confirm.
Press and hold the MHz key for two seconds.
Press the CLR key.
35
Advertisement
Table of Contents
