Footpeg/Mud Guard; Skid Plate - Honda TRX400EX FOURTRAX 1999 Service Manual

Remove the five screws, nut and the mud guard.
Remove the washer bolt from the footpeg bottom and
the inner mud guard stay.
Remove the bolt and washer and the outer mud guard
stay from the stay hole in the footpeg.
Remove the two socket bolts and washers and the
footpeg.
Installation is in the reverse order of removal.
TORQUE
OUTER MUD GUARD STAY
REMOVAL
Remove the five bolts and the skid plate from the
swingarm.
INSTALLATION
Hook the chain guard of the skid plate onto the
mounting boss on the swingarm, install the 6 mm bolt
and new four 8 mm bolts and tighten them.
TORQUE 8 mm bolt: 30 Nm 13.1 kgfm, 22 IbfW
INNER MUD GUARD ST
WASHER BOLT SOCKET BOLTS