Install the cam chain drive sprocket onto the crank-
shaft, b y aligning the wide groove w i t h the wide
tooth.
Install the cam chain onto the drive sprocket and
through the crankcase.
Apply locking agent
threads.
Install the washer (between the crankcase and slider),
tensioner sliderlcollar and bolt, and tighten the bolt
securely.
Install the following:
tion 9)
-
piston and cylinder (section 8)
-
cylinder head (section
oil pump (section 4)
- flywheel (section 10)
starter motor (section 18)
-
-
engine (section 6 )
11-16
to
the cam chain tensioner bolt
drive gear, clutch, gearshift linkage (sec-
.
I