ENGINE REMOVAL/INSTALLATION
ENGINE REMOVAL
Drain the engine oil (page 3-91
Remove the following:
tank and heat protector (page
-carburetor assembly (page 5-3)
-exhaust system (page 2-6).
Loosen the rear axle for maximum drive chain slack
(page 3-13).
Remove the two bolts, sprocket cover, sprocket pro-
tector and clamp.
Remove the fixing plate bolts.
Remove the fixing plate by aligning the splines of the
plate and countershaft.
Pull
the drive sprocket off the countershaft and
remove the sprocket from the chain.
Remove the pinch bolt and the gearshift pedal.
Release the neutral switch wire from the clamp and
disconnect the connector.
Disconnect the alternator connectors and release the
wire from the wire band and clamp.
Disconnect the spark plug cap.
Disconnect the cylinder head breather tube.
?